research and development
ELETTROMECCANICA TIRONI has designed and manufactured electrical transformers in oil for over 50 years mainly at the original headquarters of the company, located in Modena, and now covers the following range of products:
From late 2010, with the completion of ongoing investments, the range of power transformers will be to 500MVA - 420kV.
The monthly production capacity of our facilities consists of about 6 to 9 power transformers and about 400 to 500 distribution transformers, that is, about 300 MVA total monthly (divided into 200 MVA of Power and 100 MVA of Distribution) for a total of 3,300 MVA annually.
Despite the substantial correctness of the data, the production capacity of ELETTROMECCANICA TIRONI is affected by many factors such as size, weight and type of cooling system of the transformers produced. This means that with sufficient notification of an order, the company can easily satisfy a much higher diversity of equipment.
For every order ELETTROMECCANICA TIRONI sends a personalized activities programme to which the customer can refer for a schedule of any activities and/or repairs. This is updated and sent at least on a monthly basis to allow a continuous and proper planning of all activities of installation.
- Auto-transformers and transformers for transmission and distribution, with power up to 320MVA and primary voltage up to 300kV;
- Transformers for generation, step-up to 320MVA - 300kV
- Transformers suitable for transport within the railway gauges used as mobile stations.
- Furnace Transformers for steel and copper metallurgical industries;
- Glass furnace transformers;
- Rectifier Transformers for AC / CC converting systems;
- Special transformers
- High voltage shunt reactors;
- High voltage series Reactors;
- Reactors for furnace plants;
- Coil for the grounding of the HVneutral of power transformers;
- Petersen coils;
- Earthing transformers
From late 2010, with the completion of ongoing investments, the range of power transformers will be to 500MVA - 420kV.
The monthly production capacity of our facilities consists of about 6 to 9 power transformers and about 400 to 500 distribution transformers, that is, about 300 MVA total monthly (divided into 200 MVA of Power and 100 MVA of Distribution) for a total of 3,300 MVA annually.
Despite the substantial correctness of the data, the production capacity of ELETTROMECCANICA TIRONI is affected by many factors such as size, weight and type of cooling system of the transformers produced. This means that with sufficient notification of an order, the company can easily satisfy a much higher diversity of equipment.
For every order ELETTROMECCANICA TIRONI sends a personalized activities programme to which the customer can refer for a schedule of any activities and/or repairs. This is updated and sent at least on a monthly basis to allow a continuous and proper planning of all activities of installation.
